hi there
i run the new clutch at the moment.
when in use dont be alarmed if you hear a ringing or tinging when driving left hand corners. also when the engine starts you may hear a ting from the clutch. it is funny because even when driving you can hear who is using a new clutch.
on the fitting. read the manual as has been said. there was an article about the new clutch in karting magazine.
the clutch plate/crankshaft nut now needs to be tightened to 150NM not 100NM. the blocks bolts should be tightened to 20NM, HOWEVER I AM IN TALKS WITH JAG ABOUT THIS AFTER BREAKING 2 BOLTS. and the i tighten the crank end nut to 30NM with some locktite.
hope this helps
adrian criddle
|
|