UK Karting - Notice Board (General Karting) : Re: Doing the 100cc are we then? ==> doing Aixr

Notice Board (General Karting)

Re: Doing the 100cc are we then? ==> doing Aixr
Posted by 'dynamax' on 16 Dec 2010 @ 09:01

| View Message Thread | Reply to this message |

dynamaxJoined: August 2004
Total Posts: 25
[ View User Profile ]

Have a look at the Cheetah kart,the water pump is mounted on l/hand axle carrier and the pulley belt drive is between the l/h hub and the bearing carrier,just change the hoses.

Or bolt a piece of thick flat bar to the mushroom clamp facing the back of the kart, drill it and fit pump U shaped mounting bracket to it,re-fit pump to U bracket so moving the pump rearward,fit shorter belts available as O rings from any hydraulic co. then you are away again. If Formula Blue make sure you use the hoses "as supplied by manufacturer" if running MSA.

Message Thread:

How to move the seat back further with water pump by 'doctor46' (15 Dec 2010 @ 13:27)

Doing the 100cc are we then? by 'alanrr' (15 Dec 2010 @ 16:17)

Re: Doing the 100cc are we then? by 'Booney' (15 Dec 2010 @ 21:06)

Re: Doing the 100cc are we then? by 'doctor46' (15 Dec 2010 @ 22:30)

Re: Doing the 100cc are we then? ==> doing Aixro by 'doctor46' (15 Dec 2010 @ 22:23)

Re: Doing the 100cc are we then? ==> doing Aixr by 'dynamax' << You are here!

Re: Doing the 100cc are we then? ==> doing Aixr by 'dave56' (16 Dec 2010 @ 18:36)

Or make your own belts... by 'Booney' (16 Dec 2010 @ 21:02)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links