UK Karting - Notice Board (General Karting) : Re: Alfano problems

Notice Board (General Karting)

Re: Alfano problems
Posted by 'AlfieMoon' on 04 Aug 2014 @ 11:25

| View Message Thread | Reply to this message |

AlfieMoonJoined: October 2003
Total Posts: 2
[ View User Profile ]

If the Alfano has got very wet at any time, there could be some corrosion in the switches.

It is possible that when you press the buttons it doesn't give just one clear signal but a series of intermittent signals, and that confuses the chip that holds the settings.

Also try each battery terminal separately on the connector as you sometimes get one that is a bit loose but the connector feels tight when they're both connected.

I have cured weird faults by going through each of the menu stages and altering the setting and saving the result, doing a reset then going back and putting the right settings back in.

If you suspect water damage it's not too difficult to dismantle the Alfano and just look for any corrosion around the switches.

They are easy to replace with a small soldering iron and you can buy them on Ebay cheaply, just make sure you get the long ones.

Message Thread:

Alfano problems by 'k04karting' (03 Aug 2014 @ 20:58)

Re: Alfano problems by 'goman' (03 Aug 2014 @ 21:20)

Re: Alfano problems by 'k04karting' (03 Aug 2014 @ 21:46)

Re: Alfano problems by 'Ditch' (04 Aug 2014 @ 5:56)

Re: Alfano problems by 'AlfieMoon' << You are here!

Re: Alfano problems by 'KartCrazyCoUK' (05 Aug 2014 @ 21:53)

Re: Alfano problems by 'k04karting' (17 Aug 2014 @ 19:14)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links