Hi,
Karting tomorrow but I can't start a clutched BT82. There is no spark at the plug. I have ruled out the black box with all the wires/ht lead/spark plug by swapping them with another karts (the other kart engine worked OK after the swap and mine did not).
The wires that go from the PVL block to the magnet on the side of the engine show no continuity between them - whereas on the working kart they do. So I think that one of the wires could be snapped where they attach to the magnet end ?
Trouble is I dont know how to get at the wires. Can anyone briefly guide me on the steps to do this so I can check it out ?
Many Thanks in anticipation
|
|