|
Thanks fellas. We do run a second engine and the prob seems to occur with that too. However, that engine only has 55mins since a new barrel so perhaps is'nt bedded in yet. We have changed over the coil, carb, fuel pump etc. But haven't changed the loom. Low fuel level has occurred to us as we tend to run with the tank about 1-2cm above the waisted part of the Gillard fuel tank so will run a higher level next time out. We changed the in-tank fuel line filter after the last meeting but haven't run since so can't be sure if that is the prob. Do exhausts ever move slightly off the manifold under cornering G and if so, could an air leak here cause the effect?
|
|