UK Karting - Notice Board (2-Stroke Karting) : Fitting new Mojo's !

Notice Board (2-Stroke Karting)

Fitting new Mojo's !
Posted by 'abarth595' on 18 Oct 2014 @ 19:50

| View Message Thread | Reply to this message |

abarth595Joined: September 2013
Total Posts: 6
[ View User Profile ]

Have invested in our first set of new Mojo's after running on and fitting (with no probs) several part-worn sets. Thought I was getting good at fitting these tyres but am struggling with new front seating against bead. Cannot get bead to seat within a couple of millimetres on both sides of the rim. Have broken bead, re-lubed and inflated several times but no improvement. Gap to bead becomes apparent after reducing pressure to approx 15 psi. Am inflating to 50 psi when fitting which worked fine with worn sets. New tyres do pop-on at this pressure but leave gap at bead. Any suggestions please....(Tonykart mustard mags)

Message Thread:

Fitting new Mojo's ! by 'abarth595' << You are here!

Re: Fitting new Mojo's ! by 'Moonshine' (18 Oct 2014 @ 21:21)

Re: Fitting new Mojo's ! by 'abarth595' (19 Oct 2014 @ 11:14)

Re: Fitting new Mojo's ! by 'abarth595' (19 Oct 2014 @ 19:25)

Re: Fitting new Mojo's ! by 'Sebo75' (19 Oct 2014 @ 21:18)

Re: Fitting new Mojo's ! by 'abarth595' (20 Oct 2014 @ 8:02)

Re: Fitting new Mojo's ! by 'ManofKent' (20 Oct 2014 @ 9:14)

Re: Fitting new Mojo's ! by 'abarth595' (20 Oct 2014 @ 9:33)

Re: Fitting new Mojo's ! by 'Wildkart' (20 Oct 2014 @ 10:53)

Re: Fitting new Mojo's ! by 'SimonS' (20 Oct 2014 @ 15:54)

Re: Fitting new Mojo's ! by 'abarth595' (20 Oct 2014 @ 17:05)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links