|
|
Dad arrived at 19:00 armed with a can of refill lighter gas a sliding hammer and blow torch!? Removed all bolts from hub and sprocket carrier, also removed fuel tank and drained all fuel from lines and whipped the engine off.
Then the mad man got gas nozzle forced the gas out into the gap until it looked like it froze a little... Now this is the really stupid thing he lit blow torch wafted it over the frozen area their was a slight pop noise hey presto the sprocket carrier came straight off no problem!
Went round the axle with the flap disk on the grinder and finished it off by hand, it's now like new! Put the carrier back on and off a few times no problems.
No need for the hammer! Thank's Dad/everyone
|
|
|