Back in 2002 to 2005 water cooled rotaries the ibea 3jet (L2) were the best for rotary (usually with a yellow top). There are also 2 jet Ibeas. The 3rd jet was rarely used, something to do with wet racing I believe.
Baroni BF24(usually with red top) was a good reliable alternative and was good on reed valve motors. Easy to set up.
There were numerous types of Hubchen carbs (variations of the venturi) around then usually with blue top. example JHC type S-S and JHC type M-S-V. 1 1/6-1 1/4 low and high starters, slightly more for reeds.
Cheap as chips 7 years ago, now sought after. Uses Tilotson kits. All these described are 24mm diameter.
The later carbs for KF engines I do not know about.
|
|