UK Karting - Notice Board (4-Stroke Karting) : Re: help

Notice Board (4-Stroke Karting)

Re: help
Posted by 'MS96' on 12 Oct 2010 @ 16:54

| View Message Thread | Reply to this message |

MS96Joined: March 2009
Total Posts: 2
[ View User Profile ]

The most important thing is cleanliness as previously mentioned. The tolerance on the bearings is very close and only the slightest , burr, bit of rust or dirt will hold it solidly.

If really persistent, remove the axle from the kart and use a piece of 3x4” blockwood or similar with a 30mm hole partially drilled in it to hold the axle vertically. This will also prevent damage to the circlip recess at the end of the axle which can be easily damaged while on the floor - expensive mistake that one....

If you have one, use an old sprocket carrier with the bolt removed and use it as a drift to hit with a rubber hammer.

Works for me.
Good luck.

Message Thread:

help by 'driftkingjakegontier' (11 Oct 2010 @ 21:19)

Re: help by 'Attack2001' (11 Oct 2010 @ 21:34)

Re: help by 'Eddy' (12 Oct 2010 @ 7:53)

Re: help by 'Chriseybaby' (12 Oct 2010 @ 10:49)

Re: help by 'MS96' << You are here!

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links