UK Karting - Notice Board (General Karting) : Re: Wheel nut torque

Notice Board (General Karting)

Re: Wheel nut torque
Posted by 'rotaxmxr' on 28 Oct 2008 @ 22:14

| View Message Thread | Reply to this message |

rotaxmxrJoined: May 2005
Total Posts: 1
[ View User Profile ]

Rears are m8 nylocs, I do them by feel. They need to be tight enough to not come undone! Its a bit difficult to describe but you can do it easily with one hand and hold the wheel with your other hand.

Fronts must have nylocs and they need to be fairly new, the nyloc is all that stops the nut coming off. Tighten up the nut until the spacers on the inside of the wheel go tight, then loosen off until you can turn them with your fingers. Give the wheel a spin and check it spins freely. If it does not spin freely its too tight.

Hop that helps.

Message Thread:

Wheel nut torque by 'dale99b' (28 Oct 2008 @ 17:18)

Re: Wheel nut torque by 'Graham S' (28 Oct 2008 @ 18:02)

Re: Wheel nut torque by 'rotaxmxr' << You are here!

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links