UK Karting - Notice Board (General Karting) : Re: ID Plate oversprayed

Notice Board (General Karting)

Re: ID Plate oversprayed
Posted by 'TeamPoor' on 02 Mar 2015 @ 12:57

| View Message Thread | Reply to this message |

TeamPoorJoined: November 2012
Total Posts: 140
[ View User Profile ]

I know so many people whom have had this problem inc. myself. More often than not most blasters don't really care that much and / or the message gets missed. The number one thing is to take a note of the number, worst case you can stamp it back on.
The last two I have done - one just now, I have cut a section of rubber hose out, just fractionally over the size of the area you want to protect and then attached it in position with lock wire - at least 3 wires. Or you could use the very thin hose clips for small pipe and join a few together. With wire the blaster gets behind the wire. The powder coater / painter can then take the rubber off and mask.
Works a treat.

Message Thread:

ID Plate oversprayed by 'earshot' (27 Feb 2015 @ 16:02)

Re: ID Plate oversprayed by 'Pauldalgarno' (28 Feb 2015 @ 8:51)

Re: ID Plate oversprayed by 'PoppaAl' (02 Mar 2015 @ 7:53)

Re: ID Plate oversprayed by 'TeamPoor' << You are here!

Re: ID Plate oversprayed by 'earshot' (02 Mar 2015 @ 16:23)

Re: ID Plate oversprayed by 'TeamPoor' (03 Mar 2015 @ 14:14)

Re: ID Plate oversprayed by 'richydehav' (02 Mar 2015 @ 17:13)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links