|
put a few drops of fairy liquid into a sprayer bottle and top up with water. spray the panel you want to stick the stickers liberaly with the water mix. This will stop them sticking straight away and will allow you to squeeze out the bubbles with a plastic spreader, the type used for applying body filler. heat the stickers first with a hair dryer, this makes them more flexable. it is a tricky job though and takes along time if you want to do it properly.make sure each panel is clean and has no traces of oil or grease on. take your time, dont rush. as the water dries, the stickers will stick, keep pushing out the bubbles and creases untill its dry going over it with the hair dryer.. GOOD LUCK
|
|
|