Moondog78,
Jet-Tech customers use the exact jet the software tells them, not 2 jets leaner or richer etc..
If however you use a set of jets that have been rated by flow tested as described above and you are sure that it has been done properly, not as with some rigs which I have seen that run/test the jets in a reverse flow condition.
Then you simply need to buy one of those pill boxes with a number of separate compartments mark the compartments with a nominal jet size progression and then load your jets in the compartments in a flow-rated progression and then simply calibrate the software to match the jets as you would do normally - simples!
|
|